Products Detail

1.5 Ton Electric Chain Hoist with manual trolley
1.5 Ton Electric Chain Hoist with manual trolley
Price: $
Product Abstract:
1.Shell It is made of light aluminum shell,light but hard.The cooling fin is specially designed to ensure quick heat dissipation with the rate up to 40% and continuous service. The integral enclosed structure is applicable to place like che
Description:

1.Shell

It is made of light aluminum shell,light but hard.The cooling fin is specially designed to ensure quick heat dissipation with the rate up to 40% and continuous service.

The integral enclosed structure is applicable to place like chemical plant and electroplate factory.

2.The Electromagne Brake

Electromagnetic brake is featured by its unique brake design.It immediately operates when power cuts off(even if the hoist is fully-loaded)

3.The Mechainical Load Bake

The limit switch device is installed where the weight is lifted on and off to make the motor to stop automatically so as to prohibit the chains from exceeding for safety.

4.Chain

The hook is constructed of anti-pull and heat-treated steel and heat-treatedc steel and meets required standards .The lower-hook can turn 360 degree ;its tongue provides  aguarantee for safety.

5.Hook and safety tongue

It is hot forging with perfect strength that is hard to break.The operation safety of the lower hook is ensured by its 360 degrees rotation and safety tongue piece.

6.Support frame

The loading support frame consists of two steel plates,which is extremely sturdy.

7.Transformer

24V/36V transformer  deveice .The deveice is used to prohibit unexpected accidents caused by electric leakage and guarantees the safe uses while raining.

8. Electromagnetic contactor

electromagnetic contactor can be used safely under high frequency.

9.The back-phase protect

The back-phase protects the motor from overheating in the case of wrong phase position.

10.  Limit switch

The power will cut off automatically when the hoist ascends to its limit.

11.The emergency -stop switch(if selected)

This switch is used to stop the hoist in the an emergency.The red and mushroom-shaped switch is located on the top of the switch controller .When pressed and held down ,the power will be cut off and the switch be locked.A clockwise-turn can unlock it and restart the hoist.

 

Model HD2.5 HD5 HD10 HD20
Capacity ( T) 2.5 5 10 20
Test Load(T) 1.2Gn 1.2Gn 1.2Gn 1.2Gn
Motor Power(kw) 0.5 0.75 0.75 0.75
Voltage 380V  50HZ
Lifting speed(m/min) 1.04 0.52 0.26 0.26
Lifting Height(m) 3 3 3 3
Diameter of load chain(mm) 10 10 10 10
No. of load chain fall lines 1 2 4 8


Related Products:
Inquiry Information
*name
*Content
*Telephone Number
*Your E-Mail
*Confirm Text:
看不清?点击更换 看不清?